57CM23-4A

2 phase, NEMA 23 frame size
76 mm (2.99 inch) long
4 A phase current
2.3 N.m (326 oz-in) holding torque
8 mm (0.315 inch) shaft size
Built with high quality materials including bearings and shaft made by Japanese manufacturers
High precision, low motor heating, and low vibration

The CM series stepper motors can be implemented in many industrial motion control applications. Built with premium quality materials including bearings and shaft made by famous manufacturers, they can move the attached load at high precision and with very low motor heating & vibration.

Related Products

EM3E-556E

EtherCAT communication, 20-50 VDC, 5.6 A

EM2RS-556

Modbus RTU protocol using RS485, 20-50 VDC, 5.6 A

EM556-CAN

CANopen stepper drive, 20-50 VDC, 5.6 A

EM556S

Enhanced stepper drive, 20-50 VDC, 5.6 A

DM456-V-24

Dual-axis, built-in a pulser for speed control, 20-40 VDC, 5.6 A

DM556E

Cost-effective stepper drive, 18-50 VDC, 5.6 A

Similar Products

57CM23-4A-0-I6

1.8°, NEMA 23, 76 mm (2.99 inch), 4.0A/Phase, 2.3 N.m (328.58 oz-in)

57CM23-FS

1.8°, NEMA 23, 90 mm (3.54 inch), 3.0A/Phase, 2.1 N.m (300.01 oz-in), IP65

57CM23-BZ

1.8°, NEMA 23, 116 mm (4.57 inch), 5.0A/Phase, 2.3 N.m (328.58 oz-in), Brake: 24 V@0.75 N.m

57CM23-3A

1.8°, NEMA 23, 76 mm (2.99 inch), 3.0A/Phase, 2.3 N.m (328.58 oz-in)

57CM23

1.8°, NEMA 23, 76 mm (2.99 inch), 5.0A/Phase, 2.3 N.m (328.58 oz-in)

Model	57CM23-4A
Frame Size (NEMA)	23
Length (mm)	76
Holding Torque (N.m)	2.3
Phase Current (A)	4.0
Shaft Diameter (mm)	8
Center Diameter (mm)	38.1
IP Rate	IP40
Characteristics	Standard
Resistance (ohm)	0.5
Inductance (mH)	2
Inertia (kg/cm2)	0.48
Weight (kg)	1.1